®Little Buster Sign Stand in TrafFix Devices
Little Buster Sign Stand is designed to hold 30", 36" and 48" aluminum, wood, plastic or roll-up signs. All steel construction with powder coated paint to resist rusting. Telescoping mast with adjustable rigid or roll-up sign brackets allow for variable sign height adjustments. Dual spring mounted base for added stability during high winds. Step-n-Drop legs enable you to set-up in seconds without having to bend over or stoop down. A two-position leg adjustment allows all four legs to be individually adjusted for uneven terrain. Flag holder will accept 3/4" diameter wooden or plastic dowel flags.
Instructions for setting it up:
1) Position the Little Buster stand with Step-n-Drop legs so the Sign Side label is facing oncoming traffic.
2) Place right foot on both release levers located between the legs and step down. Both legs will fall to the ground.
3) Walk to the other side of the Little Buster stand, place your left foot on both release levers and step down. The remaining two legs will fall to the ground.
4) Once all four legs are firmly on the ground, pull up on the mast to lock legs in place.
TrafFix Devices brand
Alternate Configurations:
-
Econo Buster Sign Stand
A lightweight Tri-Pod stand with galvanized steel legs and mast for roll-up or rigid signs.
$105.00 +
Also see these categories:
Features
Little Buster Sign Stand folds for compact storage
You can be assured you are in compliance with NCHRP-350 regulations when using .080 aluminum signs. Just specify the Little Buster Sign Stand with Safe Sleeve-350 Rigid Sign Bracket (Part# 24018-SSB), to meet the stringent NCHRP-350 standards.
Specs
When you have One Roll-Up Sign Mounting Bracket and a 77" long inner mast it will provide a 7 ft. bottom height to a 48″×48″ roll-up sign (# 24018-RY7).